GBC Equipment

Information

2023 HORSCH Cura 6-15 ST 9

• The closed frame design made of rectangular bars guarantees high torsional stiffness and is still light and solid.

• Pivoting at the wing sections allows for:

• More comfortable turning due to slightly raised side wings

• Excellent adaption to hilly terrain due to floating position in working position.

• Maximum frame height of 450 mm allows for harrowing high crops

• Position of the support wheels at the frame can be adapted to the spacing of the row crops (25, 30, 45, 50, 70, 75 cm)

• Simple and solid depth adjustment of the support wheels

• The two middle rear support wheels can be variably adjusted to the track width of the tractor, max. 2.50 m

• With scaper for rear support wheels, following harrow as an option

• Working widths 6 m, 9 m, 12 m, 13.5 m and 15 m

• Mechanical tine retraction in the middle segment for Cura 9 and 15 ST for a reduced transport height

• Maximum clearance due to frame height and springs above the frame

• Support wheels can be adjusted variably to the track width

• Mechanical tine retraction

• Bending due to double lifting cylinders for a 90° folding

• Up to 7 support wheels can be used

• One-side folding

• 3-part folding

• Up to 11 support wheels can be used

• Reduced working width by both-sided folding of the outside wings

• 5-part folding to 3 m transport width

• Cylinder of the 180° folding is placed inside the frame, derived from the well-proven frame concept of the tillage sector

Excels due to acreage performance and stability

Sturdy and at the same time compact design

Precision in most different conditions

Simple handling

The field of application ranges from very light harrowing in small crops to the aggressive breaking of crusted soils

• Tine pressure can be adjusted gradually hydraulically

• Option: infinitely variable adjustment with scale

• Springs are attached above the frame and allow for a gentle harrowing of high populations

• The double spring guarantees a working range of 300 g to 5 000 g and allows for a fine, blind harrowing and also for working very aggressively

• Almost constant tine pressure for different tine positions allows for working on the contours, e. g. potato ridges