Frame height of 660 mm allows for a late use in high crops
Inside clamping profile guarantees maximum variability with regard to the arrangement of the tools and at the same time allows for a compact design for large working widths
Torsional stiffness and stability due to frame concept with square tube and welded clamping profile
Fully integrated side sliding frame with a range of 450 mm
Saves weight
Allows for a low overall design depth
Leads to more precision
Cylinder with inside odometer sensor
VF stands for VariableFrame – a sturdy and versatile frame for the most different applications.
Fully integrated sliding frame
Stable parallelogram with mechanical or hydraulic down force
Adjustment without tools
Parallelogram
Solid 3-bar parallelogram for different row spacings: 25, 30, 45, 50, 60, 70, 75 and 80 cm
With a row spacing of 25 cm two resp. three rows are hoed with one parallelogram
Simple and quick adjustment of the working depth without any tools
Maintenance-free
Wide parallelogram, stable bearing and large tyres for a long operating life and good working effects, even on heavy and stony soils
Hydraulic body retraction for a transport width of 3 m and SectionControl
EdgeOn coulter
80, 150, 180 or 230 mm wide points for precise, shallow cutting – adapted to the respective row spacing
Welded to a slim shaft, for only little movement of the soil
Simple fixing of the tine at the upper spring to make sure that the height position is kept up even in hardest conditions
Precise wings
The precise wings are recommended for cutting quite closely to the plant
They can be used from row spacings from 45 to 80 cm. The earth at the plant is incorporated in the gap to prevent for example small plants from being buried by the earth flow
Crop protection discs and crop protection plates
To prevent small plants from being buried or being damaged by stones or clods, the machine can be equipped with protection discs or protection plates
