GBC Equipment

Information

2023 HORSCH Cruiser XL 12

With its 6 bars the Cruiser mixes and distributes excellently. Due to the clearance at the tine shaft of 700 mm even large quantities of organic material are no problem.

The working depth is adjusted via the support wheels at the front and the packer.

The Cruiser XL is a 6-bar specialist for shallow and medium-deep tillage. The available working widths range from 5 to 7.5 metre. It is equipped with the HORSCH spring tine which rests unobtrusively in the frame and has a release force of 150 kg. The cultivator can be equipped with all four different cultivating point version and thus can be used in all seasons.

The chassis of the Cruiser 5 and 6 XL is located behind the tine section, in front of the levelling tools. The chassis with its large wheels is used for road transport as well as for turning on the headlands. The 7 XL turns on the packer and thus protects the soil, as the weight of the machine is distributed over the whole width of the machine on the headlands.

The sophisticated design characteristics of the chassis guarantees high ground clearance when lifted as well as a save swivelling of the tyres out of the working range when lowered. The position of the chassis has been chosen to guarantee optimum manoeuvrability in the field and high driving comfort on the road.

To be able to make optimum use of the tractive output, the Cruiser XL is equipped with a fully integrated tractive power amplifier that transfers weight to the rear axle of the tractor with 1 200 kg while working. It is activated by switching the control device for lifting and lowering to a depressurised condition, without any additional control devices or cylinders.

• Intensive mixing of harvest residues due to 6-bar frame design

• All-over cutting during stubble cultivation

• Excellent levelling of the field

• Production of the fine soil in the seedbed

• 10 m and 12 m working width

• Excellent stability for highest tractor powers

• Working depth is adjusted via the robust, well-proven AluClips

• Working depth up to 15 cm

• Double RollPack packer for intensive consolidation

• Disc levelling with maintenance-free bearing in front of the packer

• Well-proven frame concept with revolver chassis: (cf. Joker 10 / 12 RT and Terrano 10 / 12 FM)

• Maximum driving stability on the road

• In the fields it always turns on the packer and the depth control wheels (optimum weight distribution, stability for quick turning manoeuvres)

• HORSCH spring tines: Combines consistent working depth and the ability to move to the side and upwards to avoid obstacles.

Features may include:

To meet the requirement of flexible use for a tillage tool, new technologies and developments in this sector are essential. A tool for stubble cultivation needs a powerful tine that distributes harvest residues in an optimum way and guarantees good mixing. For seedbed preparation in the spring the farmer expects the highest precision with regard to levelling and at the same time high stability to break the topsoil from the winter furrow. HORSCH combines all these characteristics in a new generation of tines.