Among tires: 2,020 mm (80”) | Total Min.: 2,816 mm (111”) / Max.: 2,885 mm (114”)
Loading: 3,011 mm (119”) | Mixing chamber: 2,740 mm (108”) | Power discharge Min.: 452 mm (18”) / Max.: 1,294 mm (51”)
Specifications
2020
Mainero
TMR Horizontal
2932
Feed Wagons
Minimum: 130 HP
540 rpm – 6 splines.
Main: CV PTO shaft. Heavy duty roller chain drive.
12.5/80 - 18 – PR-12 (Qty. 4).
Mixing time: 4 to 6 minutes.
120 bar
2 double acting cylinders outlets to: - Power discharge heigth. - Dicscharge door opening/closing
Tire-power to discharge clearence Min.: 751 mm (30”) / Max.: 821 mm (32”)
Total: 5,544 mm (219”) | Mixing chamber: 4,000 mm (157”)
Loading: 3,011 mm (119”) | Mixing chamber: 2,740 mm (108”) | Power discharge Min.: 452 mm (18”) / Max.: 1,294 mm (51”)
Among tires: 2,020 mm (80”) | Total Min.: 2,816 mm (111”) / Max.: 2,885 mm (114”)
Mixing: (12 m3) 425 cu ft
Maximum: 5,000 Kg (11,023 lb.)
Total: 4,150 kg (9,150 lb)
Shear pin on the PTO shaft.
Lower auger knives: Self-sharpening progressive-cut hardened knives. | Lower auger bottom: Wear plate floor on the whole mixing chamber length. | Upper augers: Auger flighting on the front-end and crumbling paddle-knives on the rear-end. Shear pins on both augers
